This User’s Guide documents release 0.8.0, dated 2 October 2019, of the Open On-Chip Debugger (OpenOCD).
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover Texts, and with no Back-Cover Texts. A copy of the license is included in the section entitled “GNU Free Documentation License”.
| • About: | About OpenOCD | |
| • Developers: | OpenOCD Developer Resources | |
| • Debug Adapter Hardware: | Debug Adapter Hardware | |
| • About Jim-Tcl: | About Jim-Tcl | |
| • Running: | Running OpenOCD | |
| • OpenOCD Project Setup: | OpenOCD Project Setup | |
| • Config File Guidelines: | Config File Guidelines | |
| • Daemon Configuration: | Daemon Configuration | |
| • Debug Adapter Configuration: | Debug Adapter Configuration | |
| • Reset Configuration: | Reset Configuration | |
| • TAP Declaration: | TAP Declaration | |
| • CPU Configuration: | CPU Configuration | |
| • Flash Commands: | Flash Commands | |
| • Flash Programming: | Flash Programming | |
| • NAND Flash Commands: | NAND Flash Commands | |
| • PLD/FPGA Commands: | PLD/FPGA Commands | |
| • General Commands: | General Commands | |
| • Architecture and Core Commands: | Architecture and Core Commands | |
| • JTAG Commands: | JTAG Commands | |
| • Boundary Scan Commands: | Boundary Scan Commands | |
| • Utility Commands: | Utility Commands | |
| • TFTP: | TFTP | |
| • GDB and OpenOCD: | Using GDB and OpenOCD | |
| • Tcl Scripting API: | Tcl Scripting API | |
| • FAQ: | Frequently Asked Questions | |
| • Tcl Crash Course: | Tcl Crash Course | |
| • License: | GNU Free Documentation License | |
| • OpenOCD Concept Index: | Concept Index | |
| • Command and Driver Index: | Command and Driver Index | |