MyStyle DEFINITIONS
Specifies the style of the wharf button tiles, including background color, background pixmap (which may be transparent), and background gradient. This method of specifying the background is preferred over the BgColor, MaxColors, Pixmap, TextureColor, and TextureType options, although those (older) options do still work. See MyStyle format for details.
Specifies the style of every odd wharf button tile. See MyStyle format for details.
Specifies the style of the wharf button tile under the mouse pointer, including background color, background pixmap (which may be transparent), and background gradient. See MyStyle format for details.
Specifies the style of every odd wharf button tile under the mouse pointer. See MyStyle format for details.
Preface Introduction Topic index Glossary Back to Top
That will force contents of each Wharf's button to be aligned to either side of the button, when FitContents is not used.
See Also: Alignment flags for further details.
If specified, the opening and closing of Folders will be animated, rather than simply drawn in one frame.
Specifies the delay in milliseconds that the animation will pause between each move when opening or closing a folder.
Designates that full-length Wharf withdraws will be animated.
Specifies the steps a Folder takes in animating while opening or closing. This translates into the Folder button moving button-size/steps pixels each step.
Specifies the steps the main Wharf takes in iconification or de-iconification upon mouse button 3 being pressed. This translates into the main Wharf moving <button-size>/steps pixels each step.
Defines bevel to be drawn around balloons - replaces the BorderWidth setting.
See Also: Bevel flags for further details.
Specifies the period in milliseconds to delay the disappearance of the balloon when leaving window with the mouse.
Specifies the period in milliseconds to delay the appearance of the balloon.
MyStyle to be used to draw balloon. Note that balloons could be shaped (BackPixmap 125 and 126).
width of the border around the text in balloons.
height of the border around the text in balloons.
The balloon window is positioned to be horizontally centered against the Wharf window it is describing. The horizontal position may be set as an offset. Negative offsets of -N are placed N pixels left of the Wharf window, positive offsets of +N are placed N pixels right of the window. Defaults to +2.
The balloon window is positioned to be horizontally centered against the Wharf window it is describing. The vertical position may be set as an offset. Negative offsets of -N are placed N pixels above the Wharf window, positive offsets of +N are placed N pixels below. Defaults to +2.
Turns on the balloon feature. A "balloon" is displayed showing the name of the button the pointer is resting on in the Wharf. The balloon background and text are configured with the MyStyle "*WharfBalloon". See afterstep(1x) for more information on MyStyles.
Determines exact size and shape of the 3D bevel drawn around each button. This option is somewhat synonymous to NoBorder. If NoBorder is encountered after Bevel - then it will override Bevel, otherwise Bevel will override NoBorder.
See Also: Bevel flags for further details.
Specifies the number of columns of buttons to be created. This will give your Wharf a vertical layout, with the number of columns equal to the number specificed in columns. If unspecified, the number of columns will be set to 1. If the columns are set to a number greater than 1, then there will be that number of columns with enough rows to satisfy the requested number of buttons. Only one of *WharfRows or *WharfColumns should be specified.
Determines algorithm used to blend all the icons and Wharf background to form the button's image. Valid es are 130-145 ( see MyStyles section ). The default value is 131 ( alpha-blending )
Wharf will draw each button so that it fits its contents perfectly (icon or swallowed app ). That will cause some of the Wharf's buttons to differ in size from others. Use in conjunction with ShapeToContents.
Will cause Wharf to draw vertical label text.
sets the distance between opened folder and its parent.
If specified, will force pixmaps to Size instead of the default of 64x64. This has no effect on the Size of the displayed icons (they will be croped if larger).
Specifies the Wharf window location and/or size. If the size is not specified, Wharf will auto-size itself in a reasonable manner. The geometry is a standard X11 window geometry specification; see XParseGeometry(3x), and EXAMPLES (below) for further details.
Specifies the location of the label. Correct values are integers from 0-32. label could be drawn on each side of the button and just on top of icon. It could also be aligned to different sides.
Specifies the style of the wharf button tiles, including background color, background pixmap (which may be transparent), and background gradient. This method of specifying the background is preferred over the BgColor, MaxColors, Pixmap, TextureColor, and TextureType options, although those (older) options do still work.
See Also: MyStyle definition for further details.
Do not show Balloons in Wharf.
sets the offset of an opened folder relative to its parent orthogonal to the opening direction. In other words this can be used to move the opened folder parallel to its parent
Specifies the number of rows of buttons to be created. This will give your Wharf a horizontal layout, with the number of rows equal to the number specified in rows. If unspecified, the number of rows will be set to 1. If the rows are set to a number greater than 1, then there will be that number of rows with enough columns to satisfy the requested number of buttons. Only one of *WharfRows or *WharfColumns should be specified.
Will cause Wharf to use X Shaped extentions and have a window of non-rectangular shape. Shape is composed from the overall geometry of buttons ( see FitContents ), shape of the MyStyle used to draw Wharf background ( if BackPixmap 126 or 125 is used ), contents of each button - such as swallowed app's shape, label and icons.
FIXME: add proper description here.
See Also: Balloon Contents flags for further details.
Tells Wharf to render a label on each of its buttons, effectively immitating the behaviour of the discontinued Zharf module.
FIXME: add proper description here.
See Also: Wharf sound definition for further details.
This should allow for all kinds of skins where each button is just a part of large shaped figure.
Specifies the circumstances under which button 3 should cause the Wharf to withdraw to a corner. If style is 0, button 3 will do nothing. If style is 1 (the default), a click on any button in the toplevel bar will cause Wharf to withdraw to the nearest corner. If style is 2, a click on either the first or the last button in the toplevel bar will cause the withdrawal.
Preface Introduction Topic index Glossary Back to Top
AfterStep version 2.2.12