#! /bin/sh
#
# baycomepp     Start Baycom EPP driver.
#
# Author:       Thomas Sailer, <sailer@ife.ee.ethz.ch>
#
# chkconfig: 345 50 50
# description: This script starts/stops the Baycom EPP driver
# processname: baycomepp
# pidfile: /var/run/baycomepp.pid

# Source function library.
. /etc/rc.d/init.d/functions

# Get config.
. /etc/sysconfig/network

## Check that networking is up.
#if [ ${NETWORKING} = "no" ]
#then
#	exit 0
#fi

[ -f /usr/sbin/baycomepp ] || exit 0

EPPCONV="-m divider=64 --epp"
EPPIF=ax0
MYCALL=hb9jnx
MYIP=44.142.52.99
GWCALL=hb9w-11
GWPATH=hb9zrh
GWIP=44.142.52.7
GWMODE="-ipmode v"

# See how we were called.
case "$1" in
  start)
	echo -n "Starting BaycomEPP driver: "
	if /usr/sbin/baycomepp -v -v -v -l ${EPPCONV} --hwaddr=${MYCALL} --ipaddr=${MYIP}; then
	    /sbin/route add -host ${GWIP} dev ${EPPIF}
	    /sbin/arp -H ax25 -s ${GWIP} ${GWCALL}
	    /usr/sbin/axparms -route add ${EPPIF} ${GWCALL} ${GWPATH} ${GWMODE}
	    /sbin/route add -net 44.0.0.0 netmask 255.0.0.0 gw ${GWIP}
	else
	    echo "unable to start BaycomEPP"
	    exit 1
	fi
	echo
	;;
  stop)
	echo -n "Stopping BaycomEPP driver: "
	/usr/sbin/baycomepp -k
	echo
	;;
  status)
	killall -USR1 baycomepp
	;;
  *)
	echo "Usage: baycomepp {start|stop|status}"
	exit 1
esac

exit 0