3.7 Cameras

A câmera in Geomview is the objeto that corresponds to a janela de câmera. By default there is only one camera, but it is possible to have as many as you want. You can control certain aspects of the way the world is drawn in each janela de câmera via the Cameras panel.

Figure 3.8: The Cameras Panel.

To create new janelas de câmera, use the v+ tecla de atalho, or see the File menu on the Main panel.

Single-Buffering

Normally, geomview windows are double-buffered: geomview draws the next picture into a hidden window, then switches buffers to make it visible all at once. On many systems, the memory for the hidden buffer comes from stealing half the bits in each screen pixel, reducing the color resolution. When single-buffering is enabled, the window flickers as each scene is being drawn, but you may get smoother images with reduced grainy dithering artifacts. Single-buffering is possible if Geomview is compiled with GL or OpenGL, but not with plain-X graphics.

Dither

Many displays offer less than the 24 bits per pixel (8 bits each of red, green, and blue) conventionally needed to show smooth gradations of color. When trying to show a color not accurately available on the display, Geomview normally dithers, choosing pixel colors sometimes brighter, sometimes darker than the desired value, so that the average color over an area is a better approximation to the true color than a single pixel could be. Effectively this loses spatial resolution to gain color resolution. This isn't always desirable, though. Turning Dither off gives less grainy, but less accurately colored, images.

Software Shading

This botão controls whether Geomview does shading calculations in software. The default is to let the hardware handle them, and in Euclidean space this is almost certainly best because it is faster. In hyperbolic and spherical space, however, the shading calculations that the hardware does are incorrect. Clique this botão to turn on correct but slower software shading.

Background Color

This botão brings up a color chooser which you can use to set the background color of the camera's window.

PROJECTION

This browser lets you pick between perspective and orthogonal projection for this camera.

Near clip

This determines the distance in world coordinates of the near clipping plane from the eye point. It must be a positive number.

Far clip

This determines the distance in world coordinates of the far clipping plane from the eye point. It must be a positive number and in general should be larger than the Near clip value.

FOV

This is the camera's field of view, measured in its shorter direction. In perspective mode, it is an angle in degrees. In orthographic mode, it is the linear size of the field of view. This number can be modified with the mouse in Cam Zoom mode.

Focal Length

The focal length is intended to suggest the distance from the câmera to an imaginary plane of interest. Its value is used when switching between orthographic and perspective views (and during stereo viewing), so as to preserve apparent size of objetos lying at the focal distance from the camera. Focal length also affects interpretation of mouse-based translational movimentos. Speed of forward movimento (in translate, fly and orbit modes) is proportional to focal length; and objetos lying at the focal distance from the câmera translate laterally at the same rate as the mouse cursor. Finally, in N-D projection mode, câmeras are displaced back by the focal distance from the 3-D projection of the world origin.

Lines Closer

This number has to do with the way lines are drawn. Normally Geomview's z-buffering algorithm can get confused when drawing lines that lie exactly on surfaces (such as the edges of an objeto); due to machine round-off error, sometimes the lines appear to be in front of the surface and sometimes they appear behind it. The Lines Closer value is a fudge factor — Geomview nudges all the lines that it draws closer to the câmera by this amount. The number should be a small integer; try 5 or 10. 0 turns this feature off completely. Choosing too large a value will make lines visible even though they should be hidden.

SPACE MODEL

This determines the model used to draw the world. It is most useful in hyperbolic and spherical spaces. You probably don't need to touch this browser if you stay in Euclidean space. For more information about these models, see Non-Euclidean Geometry.

Virtual

This is the default model and represents the natural view from inside the space.

Projective

The projective model of hyperbolic and spherical space. Geoms move under isometries of the space, and câmeras move by Euclidean movimentos. By default in the projective model, the Euclidean unit sphere is drawn. In hyperbolic space this is the sphere at infinity. In Euclidean space the projective model is the same as the virtual model except that the sphere is drawn by default.

Conformal

The conformal model of hyperbolic and spherical space. Geoms move under isometries of the space, and câmeras move by Euclidean movimentos. In Euclidean space, the conformal model amounts to inverting everything in the unit sphere.

Draw Sphere

This controls whether Geomview draws the unit sphere. By default the unit sphere appears in the projective and conformal models. In hyperbolic space this is the sphere at infinity. In spherical space it is the equatorial sphere.

Done

This botão dismisses the Cameras panel.